Dakota GPS-50-2, Manual

Page: 16 / 20

16 MAN #650519C
Configuration Setup Continued :

Setup: Compass ID number -

➢
World Cock shares with Compass data on Compass ID
o
Turning off the Compass ID will also turn off the clock
•
Hold the switch beside the GPS-50-2 display while turning the key on.
•
The display will show the current revision code as long the switch is held.
•
Release the switch. The di
splay will show “  ”.
•
Press and hold the switch until “  ” is displayed.
•
Release the switch. The GPS-50-
2 display will show “  ”.
•
Tap the switch until “  ” is displayed.
•
Press and hold the switch until “  ” is displayed.
•
Release the switch. The display will show the current ID for that reading.
o
Default is
” 
"
•
Tap the switch to change the setting from

-

or
“ 
".
o
"

" will prevent it from being displayed.
•
Press and hold the switch until “ – “ is displayed.
•
Release the switch. The GPS-50-
2 display will show “  ”.
•
Tap the switch until “  ” is displayed
•
Press and hold the switch until “ – “ is displayed.
•
Release the switch. The GPS-50-
2 display will show “  ”.
•
Tap the switch until “  ” is displayed.
•
Press and hold the switch until “ – “ is displayed.
•
Release the switch. The GPS-50-
2 display will show “  ”, or “  ” and then blank out.
Setup: Altimeter ID number -

•
Hold the switch beside the GPS-50-2 display while turning the key on.
•
The display will show the current revision code as long the switch is held.
•
Release the switch. The display will show “  ”.
•
Press and hold the switch until “  ” is displayed.
•
Release the switch. The GPS-50-
2 display will show “  ”.
•
Tap the switch until “  ” for altimeter.
•
Press and hold the switch until “  ” is displayed.
•
Release the switch. The display will show the current ID for that reading.
o
Default is
“ 
"
•
Tap the switch to change the setting from

-

or "

".
o
"

" will prevent it from being displayed.
•
Press and hold the switch until “ – “ is displayed.
•
Release the switch. The GPS-50-
2 display will show “  ”.
•
Press and hold the switch until “ – “ is displayed.
•
Release the switch. The GPS-50-
2 display will show “  ”.
•
Tap the switch until “  ” is displayed.
•
Press and hold the switch until “ – “ is displayed.
•
Release the switch. The GPS-50-
2 display will show “  ”, or “  ” and then blank out.