ZX-3
Ultrasonic Thickness Gauge
21
thickness values with minimal error. If the thicknesses are not correct, repeat
the steps above.
Basic Material Type
If the material velocity is unknown, a sample thickness cannot be taken directly from
the material, but the general type of material is known, selecting a basic material type
from the common material
(MATL)
list in the
ZX-3
would offer a reasonable
approximation of the thickness. There are 9 common materials and 2 user
programmable settings available. It’s important to note that these velocities will not
always be an exact representation of the material being tested. Use these values
only if a close approximation is acceptable. Follow the steps below to select a basic
material type:
Selecting a Basic Material Type
1) Press the
key to access the material list. The edit icon will be
illuminated and flashing.
2) Use the
keys to scroll through the material options.
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
