MAN #650778
9
PRESET ODO
Odometer preset
The odometer starts at zero, but can be preset by the customer within the first 100 miles (161 km) of riding.
After riding more than 100 miles (161 km), the menu option will no longer be displayed.
Correctly select the units to be either MPH or km/h
FIRST
, as the odometer will be set in the selected units.
The preset is in full miles or kilometers only,
no
tenths.
The odometer preset can be reset multiple times within the first 100 miles (161 km) of riding.
When >PRESET OD
press a
elease the switch.
The current miles will be displayed with the left most digit flashing.
To change the flashing number, press and release the switch to the desired number.
Press and hold the switch unti
, then release the switch.
Repeat the process of until the right most digit has been set.
With the far right number flashing, press and hold the switch and the display will show >SAVE
Verify the small odometer at the bottom is what you want set.
o
.
o
You can now step through the process again and correct your readings.
o
Turning the key off at any time will discard any attempted odometer settings.
the switch to change the display to
.
When >
is displayed, press and hold the switch
is displayed and release the switch.
Exit setup.
TACH Tachometer warning setup
When >TACH
either
, then release the switch.
When >HIGH
then release the switch.
The default high warn
2200 8400 RPMs.
Press and release the switch to increase the value by 100 RPMs.
Once reaching 8400 RPMs the next number will roll back to 2200 RPMs.
Once you choose a valid warning, press and hold the switch until
Exit menu.
High warning (shift light) setup
When >
is displayed,
, and release.
The display will show the current high RPM warning with a *.
The default is 5,500 RPMs but is selectable from 2,200 to 8,200 RPMs.
Press and release the switch to change the RPM warning point.
P
, and release.
DISPLAY setup
When >DISPLAY is displayed, press and hold the swi
, and release.
The display will show DIGITAL , BAR AND BACK as selectable options.
Press and release the switch to change the how the tach reading is displayed.
Press and ho
ELEA
, and release.
Exit setup.
