5
MAN#650678:C
SETUP MENU
*To simplify the setup procedure please download our IOS or Android app ‘Dakota Digital Motorcycle’*
The stock trip switch is used to enter setup mode. To get into setup, press and hold the function switch while turning the
key on. Press and release the switch to advance through the menus below, press and hold to enter each menu.
Main Menu
Sub Menu
Description
BLUETOOTH
STATUS CHECK
Bluetooth ID and current connection status
OFF
Disable Bluetooth connections
SETUP ONLY
Allow Bluetooth connections only while in setup
ALWAYS ON
Allow Bluetooth connections when key is on
DIAGNOSTICS
ENGINE
Read diagnostic codes from engine module
SECURITY
Read diagnostic codes from security module
ABS
Read diagnostic codes from ABS module
LIGHTING
COLOR THEMES
Set factory defined color themes
SET ALL COLOR
Set all areas to one color
DISPLAY COLOR
Set speed digit color
LABEL COLOR
Set speed label color
MESSAGE COLOR
Set message location 1 and 2 color
BAR COLOR
Set tach/fuel bar color
WARNING COLOR
Set tach high warning color
DIMMING
Set dimming method
SUNLIGHT
Set sunlight brightness method
RESET
Returns all colors and settings to factory default
SPEED
ADJUST
Adjust speed calib/- 25%
UNIT
Select MPH or km/h unit
SERVICE RESET
Set miles to service reset value or turn off
ODO PRESET
Odometer preset (Can only be set within first 100 miles)
TACH
HIGH WARNING
Set high RPM warning point
TEMP
UNIT
Set temperature unit
FUEL
SENDER
Select fuel sender
WARNING LIGHT
Enable/Disable fuel low warning light
RANGE TO EMPTY
Enable/Disable/Reset distance to empty
TEST
Display sender reading for troubleshooting
VOLT
LOW WARNING
Set low warning point
DISPLAYS
MESSAGE TOP
Show/Hide performance readings in top message location
MESSAGE BTM
Show/Hide performance readings in bottom message location
MBMS
Show MBM’s connected to the speedometer and set warning points
GEAR
PRESET
Set gears for factory Dyna or Softail
P-1200
Set gears for factory Sportster 1200
P-883
Set gears for factory Sportster 883
LEARN
Learn gears based on speed and RPM
FACTORY RESET
Resets all settings except odometer to factory defaults
VERSION
Displays software codes of each controller
EXIT SETUP
Exit
