[2]
MAN #650541:A
PARTS LIST
The kit includes the standard parts
Item
Quantity
Description
Part Number
1
1
Cruise Control Module
CRC-1000
2
1
Pedal Interface Harness
250-2766
3
1
Main Power / Input Harness
250-2933
4
1
OBDII DLC Harness
250-2785
Three cruise handles are offered: two column mount models and a dash mount version.
The column models use a different interface harness than the dash mount model.
The appropriate harness will be supplied with the handle chosen at purchase time.
Part
Style
Mounting
Harness
HND-1
Cut-off style
Requires cutting off original plastic of turn signal
394207
HND-2
Dash Mount
Requires three holes drilled into dash or console
394206
HND-3
<1980 GM turn signal replacement
Replaces older GM turn signal with screw
394207
(The harness 394206 could also be used with four wire GM stock turn signal levers built for cruise, page
[9]
)
The colors will vary some on the 394207, so matching a wire color to color will not always be feasible.
See the wiring diagrams for proper connections to the cruise handles on page
[8]
.
Pedals vary in build and operation. The pin layout must be a single row as shown in the purple pedal plug of
the
250-2766
below. If the pins are turned, or the pedal has a dual row of pins, the CRC-1000 will not function,
and the wiring and cannot be modified
“to make work”.
For proper pedal operation, a voltage test can be found on page
[12]
.
