[1]
MAN #650541:A
This manual covers the aspects of installation, operation, and troubleshooting of the
CRC-
1000 “Drive-by-Wire” cruise control.
The CRC-1000 was designed to work with CAN bus GM LS engine/drivetrain packages, as either a complete transplant
from a stock vehicle, or a Connect Cruise, using a GM ECU programmed with US SAE code.
•
Works with 2008 and newer GM CAN bus engine/drivetrain packages with US SAE code.
•
Mix and match engines, transmissions and ECUs will most likely NOT work.
•
Advanced tuning to the ECU could disable the cruise control operation.
•
The CRC-1000 is designed to only work with a GM CAN bus computer system.
o
Not designed for Ford, Mopar, or aftermarket EFI systems like Holley
Table of Contents
Parts List
Page 2
Connectors and Pin Outs
Page 3
Wiring / J1 OBDII
Page 4
Wiring / J2 Main Harness
Page 6
Wiring / J2 Clutch Switches
Page 6
Wiring / J2 Brake and LED Relay
Page 7
Wiring / J3 Cruise Handles
Page 9
Wiring / J4 Throttle connections
Page 10
Trouble Shooting
Page 12
Operations
Page 13
Safety Procedures
Page 14
Service / Warranty
Page 16
CRC-1000
Drive-by-Wire Cruise Control System
