POWER DOOR LOCK WIRING
GROUND-AT-REST Switch -
contact positions vary with style
CHASSIS
GROUND
CONSTANT-ON
CHASSIS
+12V (BATT)
GROUND
TO CONSTANT-ON
+12V (BATT.)
WHITE
BLUE
BROWN
GREEN
PURPLE
DUAL
PACK
RELAY
WHITE/RED
GREEN
small wire
WHITE/BLUE
CONSTANT-ON
FUSED +12V
RED
small wire
BLUE
FUSED +12V
CONSTANT-ON
GROUND
CHASSIS
BLACK
RED
NOTE: If no switch is to be used,
GROUND the brown and white wires.
Figure 11. Connection to power door locks with a 5-wire switch.
WIRING TO RELEASE 4 DOOR LATCHES
Buttons 1 and 2 will operate door latch releases instead of window up/down. For
solenoids which require more than 10 amps, such as Dakota Digital’s PDR-2, an external relay
should be used for powering the solenoids on outputs 3 and 4. (see figure 3.)
FUSED +12V
small wire
BLUE
small wire
GREEN
RED
DO NOT CONNECT
DO NOT CONNECT
ACTIVATED WHEN BUTTON 1 IS PRESSED
ACTIVATED WHEN BUTTON 2 IS PRESSED
TO DOOR LATCH RELEASE
TO DOOR LATCH RELEASE
FUSED +12V
CONSTANT-ON
CHASSIS
RELAY
BROWN
WHITE
GREEN
PACK
BLUE
PURPLE
GROUND
BLACK
DUAL
CONNECT ORANGE AND PINK
WIRES TOGETHER
WIRES TOGETHER
CONNECT WHITE AND GRAY
CONSTANT-ON
FUSED +12V
ORANGE
PINK
GRAY
WHITE
ACTIVATED WHEN BUTTON 4 IS PRESSED
ACTIVATED WHEN BUTTON 3 IS PRESSED
TO DOOR LATCH RELEASE
TO DOOR LATCH RELEASE
CONSTANT-ON
RED
GREEN
BLUE
If high current solenoids (>10A) are
being used, then wire another dual
relay pack here as shown in Fig. 3.
Figure 12. Connection for operating four door latch releases.
8
