MAN #650500F
HDX setup (Can also be completed using the Bluetooth app):
Using speed from the BIM-01-2
•
With ignition on. Press and hold both switches to enter SETUP.
•
Press and release either switch until SPEED is selected. Press and hold either switch to enter SPEED menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch unit BIM is displayed. Press and hold either switch to select BIM.
Using RPM from the BIM-01-2
•
With ignition on. Press and hold both switches to enter SETUP.
•
Press and release either switch until TACH is selected. Press and hold either switch to enter TACH menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch until CYLINDER is displayed. Press and hold either switch to select CYLINDER.
•
Press and release either switch until BIM is displayed. Press and hold either switch to select BIM.
Using engine temperature from the BIM-01-2
•
With ignition on. Press and hold both switches to enter SETUP.
•
Press and release either switch until WATER is selected. Press and hold either switch to enter WATER menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch until BIM is displayed. Press and hold either switch to select BIM.
Using oil pressure from the BIM-01-2 (if available)
•
With ignition on. Press and hold both switches to enter SETUP.
•
Press and release either switch until OIL is selected. Press and hold either switch to enter OIL menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch until BIM is displayed. Press and hold either switch to select BIM.
Using fuel level from the BIM-01-2 (if available)
•
With ignition on. Press and hold both switches to enter SETUP.
•
Press and release either switch until FUEL is selected. Press and hold either switch to enter FUEL menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch until BIM is displayed. Press and hold either switch to select BIM.
RTX setup (Can also be completed using the Bluetooth app):
Using speed from the BIM-01-2
•
Hold either switch while turning the key on. Once
“SETUP”: is shown, release the switch.
•
Press and release either switch until SPEED is selected. Press and hold either switch to enter SPEED menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch unit BIM is displayed. Press and hold either switch to select BIM.
Using RPM from the BIM-01-2
•
Hold either switch while turning the key on. Once
“SETUP”: is shown, release the switch.
•
Press and release either switch until TACH is selected. Press and hold either switch to enter TACH menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch until CYLINDER is displayed. Press and hold either switch to select CYLINDER.
•
Press and release either switch until BIM is displayed. Press and hold either switch to select BIM.
Using engine temperature from the BIM-01-2
•
Hold either switch while turning the key on. Once
“SETUP”: is shown, release the switch.
•
Press and release either switch until WATER is selected. Press and hold either switch to enter WATER menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch until BIM is displayed. Press and hold either switch to select BIM.
Using oil pressure from the BIM-01-2 (if available)
•
Hold either switch while turning the key on. Once
“SETUP”: is shown, release the switch.
•
Press and release either switch until OIL is selected. Press and hold either switch to enter OIL menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch until BIM is displayed. Press and hold either switch to select BIM.
Using fuel level from the BIM-01-2 (if available)
•
Hold either switch while turning the key on. Once
“SETUP”: is shown, release the switch.
•
Press and release either switch until FUEL is selected. Press and hold either switch to enter FUEL menu.
•
Press and release either switch until INPUT is displayed. Press and hold either switch to enter INPUT menu.
•
Press and release either switch until BIM is displayed. Press and hold either switch to select BIM.
