background image

Installation of Indoor Unit  

 Installation of Mounting Plate  

1. Mounting plate should be installed horizontally. As the water tray’s outlet for the indoor unit is two-way
type, during installation, the indoor unit should slightly slant to water tray’s outlet for smooth drainage of  
condensate. 
2. Fix the mounting plate on the wall with screws.

3. Be sure that  the mounting plate has been fixed firmly enough to withstand about 60 kg. Meanwhile, the

weight should be evenly shared by each screw.  

18K UNIT:  

24K UNIT:  

694  

52  

194  

298  

256  

Φ

55  

Φ55  

45  

82  

160  

14  

940  

Fig.5  

139  

184  

685  

157 

 

315  

Φ70  

Φ70  

36  

45  

65  

90  

 Drill Piping Hole   

Indoor  

 Outdoor  

1. Slant the piping hole (Φ55/70) on the wall slightly downward to the

   

outdoor side.

Wall pipe  

Seal pad  

2. Insert the piping-hole sleeve into the hole to prevent the connection piping 
and wiring from being damaged when passing through the hole.   

Φ

55/70  

Installation of Drain Hose 

1. Connect the drain hose to the outlet pipe of the indoor unit. 
Bind the joint with rubber belt. 

outlet pipe of  

indoor unit  

outlet pipe of  

indoor unit  

drain hose  

rubber belt  

2. Put the drain hose into insulating tube.

outlet pipe of  
indoor unit  

drain hose  

rubber belt   insulating tube  

- 22 - 

Summary of Contents for HS-18UIEK
































Reviews: