Care and Cleaning
Caution
Disconnect the power supply before cleaning and maintenance.
●
Do not splash water on the units for cleaning, as electric shocks may
occur
.
●
Wipe the units with a dry soft cloth, or a cloth slightly moistened with water or cleaner (not with
volatile liquid such as thinner or gasoline).
●
Cleaning the Front Panel
Remove the front panel. Dip a piece of cloth into the water colder than 45 ºC and dry it. Then wipe the
dirty part of front panel.
Note: Do not immerse the front panel into water so as to protect microprocessor components and
circuit diagram on the front panel.
Cleaning the Air Filter (every 3 months)
Note: Do not touch the fin of indoor unit during cleaning to avoid personal injury.
Lift up the front panel.
Pull the air filter downwards to take it off, as
shown in Fig.(a,b).
Use a vacuum cleaner to remove dust.
If the filters are dirty, wash them with warm water
and mild detergent.
Dry the filters in the shade.
Fig. (a)
Note: Never use water above 45 ºC to clean the air filter as it
may cause deformation or discoloration.
③
Reinstall the
air filter
Reinstall the filters along the direction of arrowhead.
Close the panel.
-
13
-
①
Take down the air filter
Fig. (b)
②
Clean the air filter
