Daitsu APU-DA30, User Manual

Page: 28 / 82

26
ENGLISH
MASTER OPERATION
Master operation
After it is power on, all the lights on the host would all fl ash, and then went out. At this time the machine is in
standby mode.
Note: the machine has a function of memorizing unexpected power-down. If the machine is unexpected
power down when it is in operation, it will automatically return to the state before accidental power failure
when the power is on again.
On/off Mode
Odor sensor Clean/Change Timer
Running mode
Fan Speed Loc k Dust sensor
Mute
Low High Turbo Auto Sleep Anion Odor
Dedust filter
AIR PURIFIER
Mode button On/off button
When the remote control is not around, you can use buttons at the central top of the machine to operate the
machine. The buttons at both ends respectively control on/off and mode switching of the machine.
Press the “On / Off” button, and the machine starts.
Press the Mode button, every time you press it the machine switches according to the following sequence.
(The indicator will shine as the mode set.)
Auto Turbo Slee p
Odor
Anion
Note: this button can not adjust the fan speed. The fan speed runs as the machine set according to the
mode.
Auto —— Fan speed automatically adjusts according to sensor’s test results of the dust and odor
concentration.
Note: if the odor sensors in the initialization state when it is power on for two minutes at the fi rst time, the
odor detection is invalid.
Odor —— High fan speed
Sleep —— Mute fan speed
Anion —— Low fan speed
Turbo —— Super high fan speed