Daitsu APU-DA30, User Manual

Page: 30 / 82

28
ENGLISH
WASH AND MAINTENANCE
Wash and maintenance
In order to maintain the best state, machines should be cleaned regularly.
During the clean process, machines should be unplug, not in wet hands which may cause electric shock and
injuries.
1.
Machine Body Cleaning
Dirt on the main frames and desks where the main frames are placed should be clean as often as possible.
After a long time, dirt would be diffi cult to remove.
• Use soft fabric
Use a dry soft fabric to remove stubborn dirt.
• No volatile substance
Petrol, thinner and abstergent would cause damage to machines.
• No detergent
Chemical composition in the detergent would cause damage to machines.
• No water spraying
Shell and other things should not be fl ushed or washed.
2.
Filter Components Cleaning
When the “cleaning” light on the screen of a machine shines, fi lter components should be cleaned.
• Use a vacuum cleaner fi rst, then use water to wash the components.
• If the components are very dirty, use neutral household detergent, or after using the vacuum cleaner, use a
cleaning rag or a soft-hair brush, then use water to wash until no residuum is left.
• After cleaning, fi x the fi lter components again. Press the mode button for 5 seconds in the holding state,
time remark would be zero cleaning, and the “cleaning” light would turn off.
3.
Sensor
Use a vacuum cleaner to remove the dust on the detection port surface of smell sensor and dust sensor.
On/off Mode
Odor sensor Clean/Change Timer
Running mode
Fan Speed Loc k Dust sensor
Mute
Low High
Turbo Auto
Sleep Anion
Odor
Dedust filter
AIR PURIFIER
Dust sensor
Odor sensor