DAITEM 173-21X, Installation Manual

Page: 9 / 18

GB
79
Fixing method
The detector can be fixed to a wall
in 3 ways:
• on a swivel bracket,
• flat against the wall,
• in a corner.
There is an anti-tamper pin for each
type of fixing method:
• swivel bracket: pin n° 0,
• flat: pin n° 1,
• in a corner: n° 2.
Back plate cover
Order in which to assemble parts
Selection of pins
Screw
+ tightening
washer
Swivel
Long screw
Pin n° 1
Pin n° 2
Back plate
IMPORTANT: when fixing the movement
detector at an angle or flat against the wall,
fix the label (provided in the sachet of
accessories) on the reverse side of the
product in order to cover the opening to
avoid insects getting through.
IMPORTANT
• For swivel bracket fixing, pin n°0 is
already factory-positioned inside
the detector.
• For reasons of security and to
ensure long battery life, installation
of the anti-tamper pin is
compulsory. In case of omission
or incorrect insertion of the pin,
the detector LED indicator lamp
flashes continuously when the
detector is fitted to its bracket.
Si fixation en angle ou à plat contre un mur
For a fixing in a corner or flat against the wall
Si fixation en angle ou à plat contre un mur
For a fixing in a corner or flat against the wall
1
653563_A
2