GB
83
6.1 Battery low indication
The control panel indicates when
the infrared detector’s battery is
low.
To check whether there is a
problem with the detector battery,
press on the detector’s test button.
If the test LED indicator lamp no
longer lights up, the lithium battery
should be replaced.
6.2 Changing the battery
To change the battery:
1.
switch the control panel to installation mode and ask the user to press:
then
2.
Open the detector casing (see § on Opening).
3.
Unclip the lithium battery pack.
4.
Wait 2 min. before replacing the flat lithium battery.
5.
Switch the control panel back to user mode, press:
master code
installer code
installer code
6. Maintenance
IMPORTANT: the detector’s
configuration is saved when the
battery is changed.
IMPORTANT: pull on the tab to remove the lithium battery.
• The lithium battery pack must be replaced by the same type of pack with the
same technical characteristics, i.e. (3.6 V - 4 Ah).
• We advise you to use the DAITEM BatLi25 pack available in the catalogue
in order to guarantee individual safety and equipment reliability.
• Dispose of the waste lithium power pack in an appropriate
recycling bin.
Li
Summary of Contents for 173-21X
Page 1: ...upgraded for e Nova applications...
Page 16: ...86...
Page 17: ...87...
Page 18: ...805493 A 03 2013...
