Daisy 9016 X-Purge, User Manual

Page: 13 / 39

Model 9016 X-Purge Operator Interface Daisy Data Displays, Inc.
February 2022 13 D010-000002
Color Code Meaning Status Recommended Action
Red 3-3 Water detected Fatal
Occurs if Water Sensor option installed. If indicated, the
unit must be SHUT DOWN, MADE SAFE, OPENED AND
DRIED OUT COMPLETELY!
VERIFY no water remains in the unit and no damage has
occurred to internal components resulting from the
water.
IN CASES OF SERIOUS WATER INCURSION, DO NOT
ATTEMPT TO REAPPLY POWER TO THE EQUIPMENT!
Equipment should be returned to DAISY for
evaluation.
Red 4-1
Faulty pressure
sensor
Fatal
Purge System component failure.
Contact DAISY Customer Service (See Section 7)
Review Customer Service on page 14 and
Troubleshooting Section page 15.
Red 4-2 Faulty flow sensor Fatal
Purge System component failure.
Contact DAISY Customer Service (See Section 7)
Review Customer Service on page 14.
Red 4-3
Short purge switch
is stuck
Fatal
The “SHORT PURGE” switch on the DIP switch
mounting board (drawing E020) is shorted, stuck, or
was held down too long while beginning a test.
VERIFY nothing is holding the switch closed or shorting
the circuit.
If you continue to experience problems, Contact DAISY
Customer Service (See Section 7)
Review Customer Service on page 14.
Red 4-4
Bypass purge
switch is stuck
Fatal
The “BYPASS PURGE” switch on the DIP switch
mounting board (drawing E020) is shorted, stuck, or
was held down too long while beginning a test.
VERIFY nothing is holding the switch closed or shorting
the circuit.
If you continue to experience problems, Contact DAISY
Customer Service (See Section 7)
Review Customer Service on page 14.