Swimming pool heat pump
- 17 -
◆
“
▲
” and “
▼
”: Up and down key
◆
“
SET
”: Setting key
◆
“
AUX
”: Electric heater key
1.1 Lock and Unlock.
1.1.1 At the non-locking key state, press “
▲
” or “
▼
” key for 3 seconds, the button locks
after the buzzer rings “Di Di” twice.
1.1.2 At the locking key state, press “
▲
” or “
▼
” key for 3 seconds, the button unlocks after
the buzzer rings “Di Di” twice.
1.2 Inquiry of System parameter and state
1.2.1 Press “
▲
” or “
▼
” key directly in the main interface, it enters inquiry interface of
temperature sensor state;
1.2.2 Press “
SET
” to inquiry all the parameter and state;
1.2.3 At inquiry interface of parameter and state, it exits inquiry interface to enter into main
interface if there is no any operation for 8 seconds.
1.3 System parameter setting
1.3.1 At inquiry interface, if it shows system parameter at present in the “
OFF
” state, press
“
▲
” or “
▼
” key at the same time for 3 seconds, the buzzer rings once, it enters the present
parameter set state;
1.3.2 Press “
▲
” or “
▼
” key to modify set value of present system parameter when entering
parameter set. After setting the parameter, press “
SET
” again to save setting value and exit the
present parameter set state, return to inquiry interface.;
1.3.3 At parameter set state, it saves the present set value and exits parameter set state,
return to main interface if there is no any operation for 8 seconds.