Lumination
®
(Tetra
®
Contour - Series)
Installation Guide
Electrical Requirements
• Light engines without light guide limited to indoor dry locations.
• Light engines with light guide acceptable to use in dry, damp or wet locations when installed correctly.
• The grounding and bonding of the LED Driver shall be done in accordance with National Electric Code (NEC) Article 600.
• Follow all National Electric Codes (NEC) and local codes.
• These products are only suitable for connection to a circuit from a Class 2 power source. These products have not been
evaluated for use when connected to a power source that does not comply with Class 2 voltage and energy limited supplies.
Prepare Electrical Wiring
2
1
2
3
4
5
6
7
8
10
8 feet (2.44m)
12
13
14
15
16
17
18
19
20
9
11
Tc=85°C
8 feet (2.44m)
Save These Instructions
UL approved 18 AWG (0.82mm
2
) supply wire
1
Tetra
®
End Caps
2
Tetra
®
Contour Light Guide connector
3
Tetra
®
Contour Light Guide 90° inside corner
4
Tetra
®
Contour Light Guide 90° outside corner
5
Tetra
®
Contour Light Guide 90° planar corner
6
Tetra
®
Mounting clips
7
Weather box GEXNWB2
8
22 AWG (0.33mm
2
) tie-wire
9
#6, #8 or #10 (M2, M3 or M4) self drilling pan headed screws
10
#6 (M2) screws
11
UL approved 22-14 AWG (0.33-2.08mm
2
) twist-on wire connectors
12
Tetra
®
24 Volt power supply
13
Tetra
®
Contour Light Engine
14
Tetra
®
Contour Light Guide
15
Cordless drill
16
Tape measure
17
Screwdriver
18
Wire stripper/cutter
19
Electrical grade silicone
20
Examples of electrical grade silicone:
• Momentive RTV 6700 Series Silicone Rubber Adhesive Sealant
• Momentive White Blanc RTV 162 Silicone Rubber Adhesive Sealant-Electrical Grade
• Dow Corning 3140 - Non-Corrosive Flowable (clear)
• Dow Corning 3145 - Non-Corrosive Nonflowable (clear or gray)
• Dow Corning RTV 748 Non-Corrosive Sealant-White
Cutting Resolution Table
21
Light Engine Color
Cutting Resolution
Red
2.29 in. (58 mm)
Red-orange
2.29 in. (58 mm)
Amber
2.29 in. (58 mm)
Green
2.29 in. (58 mm)
Blue
2.29 in. (58 mm)
White
2.00 in. (51 mm)
Warm White
2.00 in. (51 mm)
