Installation Guide
ARCH018
Lumination
®
LED Luminaire
75481, 75484, 75485, 75486, 75487, 75488, 75489, 75490, 75493, 87962, 87963
(Tetra
®
Contour Series)
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING / AVERTISSEMENT
RISK OF ELECTRIC SHOCK
• Disconnect power at fuse box or circuit
breaker before servicing or installing product.
• Properly ground Tetra
®
power supply.
RISK OF FIRE
• Use only Tetra
®
supply wire to make connection from
Tetra
®
power supply to Tetra
®
LED strip.
• Use only approved wire for input/output connection.
Minimum size 18 AWG (0.82mm
2
).
• Follow all local codes.
• Waterproof wire connection for outdoor or wet
installations. See instructions for details.
• Do not stretch light engines.
• Inspect and replace the light engines if any tear or
damage affects their integrity.
• Avoid installation that leads to prolonged
exposure to standing water or ice.
Tools and Components Required
• Neon replacement
• Border lighting
• Interior art
• Cove
• Accent lighting
• Surface Mount
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l’alimentation électrique à la boîte de fusibles ou au disjoncteur
avant l’entretien ou l’installation du produit.
• Assurez-vous de correctement mettre à terre l’alimentation électrique Tetra
®
.
RISQUES D’INCENDIE
• N’utilisez que le fil d’approvisionnement Tetra
®
pour faire la connexion
entre l’alimentation Tetra
®
et la bande DEL Tetra
®
.
• N’utilisez que des fils approuvés pour les entrées/sorties de connexion.
Taille minimum 18 AWG (0.82mm
2
).
• Respectez tous les codes locaux.
• Étanchéifier les connexions électriques effectuées à l’extérieur ou pour un
environnement exposé à l’eau. Voir les instructions d’installation pour plus
de détails.
• Ne pas étirer les modules DEL Contour.
• Inspecter l’intégrité des modules DEL Contour et les remplacer s’ils sont
déchirés ou endommagés.
• Éviter les installations avec une exposition prolongée à l’eau stagnante ou
à la glace.
Save These Instructions
Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
This product is intended for the use of non-residential architecture lighting and is not intended for use in any other applications.
LED System Features
• Certified to UL 2108
• Low Voltage Luminaire (24 VDC)
• Light Engine IP54: Dry or damp location rated;
Light Engine and Light Guide IP66: Dry, damp or
wet location rated
• Compatible with 24 Volt GE LED Drivers
• Dimmable with GE 0-10V Dimming LED Driver or
Current Dimming module and compatible
dimming controller