5
Lumination
®
(LRX - Series)
Installation Guide
7
Attach the test switch to the LRX EMBB fixture or junction box. If the fixture is 6” or 8”, first remove the nut from the end of test switch,
and put test switch through the hole of fixture, then thread nut to test switch. If the fixture is 4”, mount to the junction box and provided
flexible conduit for remote mounting of the test switch.
Tighten nut on
Remove nut from
test switch
inside of housing
Attach to housing
4"
6" and 8”
6" and 8”
6" and 8”
Tighten nut on
Remove nut from
test switch
inside of housing
Attach to housing
4"
6" and 8”
6" and 8”
6" and 8”
Box closed
Box closed
8
Connect the quick connector of LRX EMBB fixture and LRXEMBBKIT07( or LRXEMBBKIT07HE, or LRXEMBBKIT10)
and close quick connector box well.
NOTE:
Forr 1000/650lm product, default output lumen is 1000lm. Push switch up or left to activate 650lm. For 4000/3000lm product, default
output level is 4000lm.
Lumens Setting Switch
Tighten nut on
Remove nut from
test switch
inside of housing
Attach to housing
4"
6" and 8”
6" and 8”
6" and 8”
Tighten nut on
Remove nut from
test switch
inside of housing
Attach to housing
4"
6" and 8”
6" and 8”
6" and 8”
NOTE:
For phase cut dimming product, dimming leads (violet and gray wires) are disconnected.
NOTE:
For phase cut dimming product, dimming leads (violet and gray wires) are open.