2
Lumination
®
(LRX - Series)
Installation Guide
Kit vs Fixture
LRXR EMBB Fixture
LRXR EMBB Frame Kit
LRXS EMBB Fixture
LRXS EMBB Frame Kit
SAP Description
SAP Description
SAP Description
SAP Description
LRXR410ABBCCEL
LRXEMBBKIT07HE
LRXS410ABBCCEL
LRXEMBBKIT07HE
LRXR610ABBCCEL
FRAME6REL07
LRXS610ABBCCEL
FRAME6SEL07
LRXR618ABBCCEL
FRAME6REL10
LRXS618ABBCCEL
FRAME6SEL10
LRXR618ABBCCEL
FRAME6REL10
LRXS618ABBCCEL
FRAME6SEL10
LRXR810ABBCCEL
FRAME8REL07
LRXS810ABBCCEL
FRAME8SEL07
LRXR818ABBCCEL
FRAME8REL10
LRXS818ABBCCEL
FRAME8SEL10
LRXR830ABBCCEL
FRAME8REL10
LRXS830ABBCCEL
FRAME8SEL10
LRXR840ABBCCEL
LRXS840ABBCCEL
Nomenclature for
LRX Series:
I
- “A” Denotes color rendering index (CRI)
8
- 80
9
- 90
II
- “BB” Denotes correlated color temperature (CCT)
27
- 2700K
30
- 3000K
35
- 3500K
40
- 4000K
50
- 5000K
Save These Instructions
Use only in the manner intended by the manufacturer. If you
have any questions, contact the manufacturer.
LRXREL Fixture
Thickness of Ceiling
LRXSEL Fixture
Thickness of Ceiling
SAP Description
Max.(mm)
SAP Description
Max.(mm)
LRXR410ABBCCEL
15
LRXS410ABBCCEL
15
LRXR610ABBCCEL
LRXS610ABBCCEL
LRXR618ABBCCEL
LRXS618ABBCCEL
LRXR618ABBCCEL
20
LRXS618ABBCCEL
20
LRXR810ABBCCEL
LRXS810ABBCCEL
LRXR818ABBCCEL
LRXS818ABBCCEL
LRXR830ABBCCEL
LRXS830ABBCCEL
LRXR840ABBCCEL
LRXS840ABBCCEL
III
- “CC” Denotes dimming type
MD
- 0-10V Dimming
PH
- Phase cut Dimming
• LRXEMBBKIT07HE shall be mounted Max. 20.11 ft ( 6.12 m)
• LRXEMBBKIT07 shall be mounted Max. 22.71ft (6.92m)
• LRXEMBBKIT10 shall be mounted Max. 25.99ft (7.92m)
Thickness of ceiling is listed below:
CAUTION / ATTENTION
•
Fixture may fall down if not installed properly, follow
installation instructions.
• Wear safety glasses and proper aid during installation and
maintenance.
•
Use only UL certified copper wire, wire connectors,
minimum 18AWG, minimum rated 75°C.
•
Porter des lunettes de sécurité et utiliser des outils adéquats durant l’installation
et la maintenance.
•
Utiliser seulement du câblage de cuivre classé 75°C et approuvé par UL pour les
connections d’entrées et de sorties.
•
Utiliser des conducteurs de grosseur 18AWG minimum ou de grosseur 14AWG
dans le cas de montage en rangée continue.
NOTE:
LRXEMBBKIT07HE, LRXEMBBKIT07 and LRXEMBBKIT10 are suitable for wet locations and are intended for covered ceiling installation only. The retrofit kit is accepted as a component of a luminaire
where the suitability of the combination shall be determined by UL or authorities having jurisdiction.
Wear work gloves to prevent dirt and oil from being transferred to the luminaire.