I
nstallation Guide / Manuel d’Installation / Guía de instalación
3
Clean the mounting surface.
Peel off the release paper
from the back
Connect the SA2-01
connector.
Distribute the rigid bars
in the light box accord
-
ing to proper spacing. Be
careful not to damage
lens, LEDs and electronic
components of the rigid
bar.
Screw to fix the bar
Connect the main line of
rigid bar to the 24V power
supply.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CAN ICES-005 (A) / NMB-005 (A)
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter
-
ference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interfer-
ence in which case the user will be required to correct the interference at his own expense.
If the bar need to be joint
-
ed, please arrange it as the
picture shows.
