DTP10-P hardware user
’s manual
DAINCUBE Corp.
31 / 38
✏
Note
:
Using ferrite cores, increase the maximum number of turns around the ferrite for optimum
results.
Servo
drive
wiring for conformity to EC directives and UL standards.
Ferrite core
Noise filter
[Figure 8-16]
Panasonic AC Servo drive
Installation manual
✏
Note
:
Servo drive part must install the Noise Filter and Ferrite core as shown in the figure.
For more information, please refer to the motor drive manual.
It is recommended to use the following Ferrite core.
[Figure 8-17] TDK ferrite core
NEC TOKIN: ESD-SR-250, SEIWA ELECTRIC: E04SRM563218:
It's possible to use.
8.3.7. Earthing
The F.G pin in
a
circle Connector must be wired to the F.G terminal of the SMPS.
Earth pin on LAN1 and LAN2 is a signal Shield.
Earth wire should be used more than 2 mm.
The length of the ground line is as short as possible.
AC Power Earth and control system Ground are must be isolated.
Master
Slave
Master
Slave
√
[Figure 8-18]
Earth wiring methods
