INSTALLATION
(1) Remove the oil fill cap, clean the oil return pas-
sage in the cylinder head cover, then blow out with
low pressure compressed air.
(2) Clean mating surfaces.
(3) Install the CCV breather and tighten fasteners
to 11 N·m (97 in.lbs.) (Fig. 3).
(4) Connect the CCV breather outlet hose (Fig. 3).
(5) Install the engine cover (Refer to 9 - ENGINE -
INSTALLATION).
Fig. 3 CCV BREATHER
1 - FUEL RAIL
6 - CAM POSITION SENSOR
2 - FUEL RAIL PRESSURE SENSOR
7 - FUEL INJECTOR
3 - FUEL INJECTOR RETURN LINE
8 - HIGH PRESSURE FUEL INJECTOR SUPPLY LINE
4 - CCV BREATHER
9 - FUEL PRESSURE SOLENOID
5 - CYLINDER HEAD COVER
10 - FUEL RAIL SUPPLY LINE
VA
EVAPORATIVE EMISSIONS
25 - 3
