background image

15 English

Basic Operation

When the master indoor  

unit is set to

The other indoor units in the system can be set to

Cool

Dry

Heat

Fan

Cool mode
Dry mode
Heat mode
Fan mode
Auto mode (Cooling operation)
Auto mode (Heating operation)

Precautions for Selecting the Cool / Heat Changeover Master Indoor Unit

 

The cool/heat changeover master must be set for a single indoor unit in the following applications

(2-Pipe Heat Pump System)

(3-Pipe Heat Recovery System)

Indoor units

Indoor units

A number of indoor units are 

connected to a single outside unit.

Set any one of the indoor units as

the cool/heat changeover master.

A number of indoor units are connected 

to a single Branch Selector unit.

Set any one of the indoor units as

the cool/heat changeover master.

Branch Selector unit:

The Branch Selector unit is used for 

cooling or heat mode selection.

Key Lock 

Operation

Confirm and cancel Key Lock settings in the basic display screen. 

Cool

Return

Setting

Set to

Cool

74

F

Basic screen

 

Press the Menu/OK button for at least four seconds while the backlight is 

illuminated.

Cool

Return

Setting

Set to

Cool

74

F

 

“ ” will display. 

All buttons are disabled when the keys are locked.

 

To cancel the key lock mode, continue pressing Menu/OK button for at 

least four seconds while the backlight is illuminated.

Summary of Contents for VRV W T-series













































Reviews: