English 6
1.
Operation mode selector button
●
Press this button to select the operation mode of your
preference.
(See page 9.)
* Available modes vary with the indoor unit model.
2.
Fan speed control button
●
Press this button to select the fan speed of your preference.
(See page 10.)
* Available fan speeds vary with the indoor unit model.
3.
Menu/OK button
●
Used to indicate the main menu.
(See page 15 for the menu items.)
●
Used to enter the selected item.
4.
Up button
●
Used to raise the setpoint.
●
The item above the current selection will be highlighted.
(The highlighted items will be scrolled continuously when the
button is continuously pressed.)
●
Used to change the selected item.
5.
Down button
●
Used to lower the setpoint.
●
The item below the current selection will be highlighted.
(The highlighted items will be scrolled continuously when the
button is continuously pressed.)
●
Used to change the selected item.
6.
Right button
●
Used to highlight the next items on the right-hand side.
●
Each screen is scrolled in the right-hand direction.
7.
Left button
●
Used to highlight the next items on the left-hand side.
●
Each screen is scrolled in the left-hand direction.
8. On/Off button
●
Press this button and system will start.
●
Press this button again to stop the system.
9.
Operation lamp (Green)
●
This lamp illuminates solid during normal operation.
●
This lamp blinks if a error occurs.
10. Cancel button
●
Used to return to the previous screen.
11.
LCD (with backlight)
●
The backlight will be illuminated for approximately 30 seconds
by pressing any button.
●
If two remote controllers are used to control a single indoor
unit, only the controller to be accessed first will have backlight
functionality.
<Cool/Heat selector>
12.
Fan only/air conditioning selector switch
●
Set the switch to “
” for fan only operation or to “
” for
heating or cooling operation.
13.
Cool/heat changeover switch
●
Set the switch to “
” for cooling operation or to “
” for
heating operation.