SiBE341027
Troubleshooting by Remote Controller
Service Diagnosis
169
Troubleshooting
To Diagnosis Flow 1
Check the LED lamps for
“Confirmation of error 3”
corresponding to the error
code “
UA
” and for Confirmation
of error 4 in the monitor mode.
To Diagnosis Flow 2
To Diagnosis Flow 3
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Confirmation of error 3 Confirmation of error 4
Caution
Be sure to turn off power switch before connect or disconnect connector,
or parts damage may be occurred.
To Diagnosis Flow 4
