SE-04753
[Operation Manual]
45/49
DAIKIN INDUSTRIES, LTD.
2. When parameter [P08] is
“
1
”
2-1 When the pressure switch function is not used
2-2 When the pressure switch function is used
2-3 When the pressure switch function is used (Stop at power-ON)
H: Stop command
L: Operation command
H: Normal
Power supply (200V)
Start/stop signal
Alarm/Warning
(Relay output)
Pressure
Mode
Display
L: Abnormal
3 sec. max.
0.2 sec. average
Charging
Magnetic pole detection
Actual pressure display
Normal control
Actual pressure display
Actual pressure display
Power supply (200V)
Start/stop signal
Alarm/Warning
(Relay output)
Pressure
Mode
Display
3 sec. max.
0.2 sec. average
Charging
Magnetic pole detection
Normal control
Actual pressure display
Actual pressure display
Actual pressure display
H: Stop command
L: Operation command
H: Normal
The output may be unstable
depending on the relationship
between the pressure switch
setting and delay time.
L: Abnormal
Pressure switch setting
Power supply (200V)
Start/stop signal
Alarm/Warning
(Relay output)
Pressure
Mode
Display
3 sec. max.
0.2 sec. average
L: Operation command
H: Normal
H: Stop command
L: Abnormal
Pressure switch setting
Charging
Magnetic pole
detection
Normal control
Actual pressure display
Standby for operation
* Magnetic pole detection will be executed at the first motor startup after power-ON.
The output may be unstable depending on the
relationship between the pressure switch setting
and delay time.
