Si04-955
Removal of Air Filters / Front Panel
Removal Procedure
3
3
Pull out the air filter
downward.
The right and left filters are
interchangeable.
Insert the air filters along
grooves when installing.
Insert the 2 hooks of the air
filter completely.
3. Remove the Titanium
apatite photocatalytic air-
purifying filters.
1
Push up the bottom of a
Titanium apatite
photocatalytic air-
purifying filter to
unfasten the hooks (2
on lower, 3 on upper)
and take the filter out.
The right and left filters are
interchangeable.
4. Remove the front panel.
Slide the front panel side to
side to release each shaft.
When reassembling the front
panel, fit the right and left
rotary shafts one by one into
the grooves and fully push
them in position.
1
While opening the front
panel further than
where it stops, release
both the shafts and
remove the front panel.
Step
Procedure
Points
"FRONT"
Hook
(R13212)
Hook
Hook
(R13213)
Titanium apatite
photocatalytic air-
purifying filter
(R2752)
(R18632)