Removal of Fan Rotor / Fan Motor
Si04-955
18
Removal Procedure
3
Remove the fan rotor.
When reassembling the fan
motor and the fan rotor,
provide as much as 5 mm of
play between the side face
of the rotor and the bottom
frame.
(1) Insert the fan motor with
approx. 5 mm left.
(2) Tighten the screw until it
stops. Then give the screw
one more turn.
(3) Rotate the fan rotor and
confirm the fan motor and
the fan rotor are installed
appropriately.
(4) Tighten the screw
completely if appropriate.
(5) If not appropriate, go back to
(1).
3. Remove the bearing.
1
Remove the fan rotor.
The bearing is on the
left side.
2
Remove the 2 screws
and remove the left side
plate.
3
The bearing is made of
rubber. Push it inwards
firmly and remove it.
Step
Procedure
Points
Fan motor
(R13230)
5 mm
Side face of rotor
(R2808)
Side face of
bottom frame
(R9582)
Fan rotor
(R5385)
Left side plate
(R16546)
Bearing
(R5387)