Removal of Horizontal Blades / Vertical Blades
Si04-955
6
Removal Procedure
3. Removal of Horizontal Blades / Vertical Blades
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1. Remove the horizontal
blades.
1
Open the horizontal
blade (large).
2
Release the left shaft of
the horizontal blade.
3
Bend the horizontal
blade slightly and
release the 2 center
shafts.
Slide the horizontal
blade to the left and
release the right shaft.
There is a key alignment at
the right shaft. When
reassembling, insert the right
shaft first while turning.
After inserting the right shaft,
mount the horizontal blade to
the center shaft and then to
the left shaft.
Horizontal blade (large)
(R13216)
Horizontal blade (large)
(R13217)
Horizontal blade (large)
(R13218)
Horizontal blade (large)
Key alignment
(R15468)