RA Indoor Unit
SiBE121135
150
Operation Manual
FTXS20/25K2V1B, CTXS15/35K2V1B
Adjusting the Airflow Direction
and Rate
You can adjust the airflow direction to increase your comfort.
To start auto swing
To set the flap at desired position
To adjust the louvers at desired position
Upper and lower airflow direction
Press .
Press when the flap has reached the
desired position.
• This function is effective while flap is in auto swing mode.
Hold the knob and move the louvers.
• You will find a knob on the left-side and the right-side
blades.
• When the unit is installed in the corner of a room, the
direction of the louvers (vertical blades) should be facing
away from the wall.
If they face the wall, the wall will block off the wind,
causing the cooling (or heating) efficiency to drop.
• If the flap is in the way, press on the remote controller to move the flap out of
the way and then adjust the louvers.
• “ ” is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
• “ ” disappears from the LCD.