RA Indoor Unit
SiBE121135
152
Operation Manual
FVXG25/35/50K2V1B
You can adjust the airflow direction to increase your comfort.
To start auto swing
Upper and lower airflow direction
Press .
To set the flap at desired position
• This function is effective while flap is in auto swing mode.
• “ ” disappears from the LCD.
To adjust the louvers at desired position
Adjusting the Airflow Direction
and Rate
• “ ” is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
Press when the flap has reached the
desired position.
Hold the knob and move the louvers.
• You will find a knob on the left-side and the right-side blades.
• When the unit is installed in the corner of a room, the direction
of the louvers (vertical blades) should be facing away from the
wall.
If they face the wall, the wall will block off the wind, causing the
cooling (or heating) efficiency to drop.
• If the flap is in the way, press on the remote controller to
move the flap out of the way and then adjust the louvers.