background image

3

Safety Precautions

 

„

Observe these precautions in order to prevent property damage or injury.

 

„

The consequences of incorrect use are categorised as follows.

 

WARNING

 

CAUTION

Failure to follow these instructions properly 

may result in personal injury or loss of life.

Failure to follow these instructions properly may 

result in property damage or personal injury, which 

may be serious depending on the circumstances.

 

„

Precautions to be observed are categorised using symbols.

Never attempt.

Be sure to follow the instructions.

 

 

WARNING  

Observe in order to prevent fires, electric shocks or severe injury.

 

„

Concerning the power supply plug and cord

• 

Do not unplug while the unit is in operation. (Fire or an electric shock may result from heating)

• 

Do not plug or unplug with wet hands. (An electric shock may result)

• 

Do not use in such a way that the ratings of the power socket or wiring appliances 

are exceeded or use a voltage outside of the range AC220-240V. 

(Fire may result from heating if the ratings of multi-socket power adapters, etc., are exceeded)

• 

Do not pull on the power supply cord when unplugging. 

(Heating or fire may result from wire breakage)

• 

Do not subject to acts that might damage them.

 

Such acts include damaging, modifying, forcibly bending, pulling, twisting, bundling up, placing heavy objects on, 

etc., the power supply plug or cord. If the power supply plug or cord is damaged, it must be replaced by the 

manufacturer, its service agent, or a similar qualified person in order to avoid a hazard. 

 

(An electric shock, short circuiting, or fire may result from use while damaged)

• 

Insert the power supply plug firmly all the way in.

 

Do not use a damaged power supply plug or a loosely fitted power socket. 

 

(An electric shock or fire, due to heating or short circuiting, may result if the power supply plug is not firmly inserted)

• 

Periodically wipe dust off the power supply plug with a dry cloth.

 

If the unit is not to be used for an extended period of time, unplug the power supply plug. 

 

(Fire or overheating may be caused by defective insulation resulting from moisture etc.)

• 

When performing maintenance, inspecting, or moving the unit, make sure to turn off 

and unplug the appliance. (An electric shock or injury could result)

 

„

Do not use in the following places

• 

Places where oil or flammable gases are used or may leak.

 (Fire or smoke may result from 

ignition or suction toward the unit, or injury may result from degradation or cracking of plastic)

• 

Places where there is corrosive gas or metal dust particles.  

(Fire or smoke may result from 

ignition or suction toward the unit)

• 

Places where temperature and humidity levels are high or water may scatter, such 

as a bathroom. (Fire or an electric shock may result from electrical leakage)

• 

Places accessible to small children. (An electric shock or injury may result)

 

„

During use

• 

Do not use chlorinated or acidic detergents. (Injury may result from the degradation or cracking of 

plastic, or harm may be caused to health from the production of toxic gases)

• 

Keep burning cigarettes or incense sticks away from the unit.

  

(Fire or smoke may result from ignition or suction toward the unit)

• 

Do not attempt to disassemble, reconstruct or repair the unit yourself. 

 

(Fire, an electric shock, or injury may result) For repairs, please contact the place of purchase.

• 

Do not insert fingers, sticks, or any other item, into the air inlets or air outlet.

  

(An electric shock, injury, or damage may result)

• 

Do not pour water on to the air outlet or the unit. (Fire or an electric shock may result)

• 

Do not use flammable substances  (hair spray, insecticide, etc.) near the unit.

 

Do not wipe the unit with benzine or thinner. 

(An electric shock, fire, or cracking may result)

Read First

01_EN_3P484757-1D.indd   3

10/1/2018   11:37:07 AM

Summary of Contents for STREMER MC40UVM6

























Reviews: