background image

5 Preparation

Installer and user reference guide

9

RXYSCQ4~6TMV1B
VRV IV-S system air conditioner
4P404224-1C – 2019.07

The  VRV  IV-S  heat  pump  system  can  be  combined  with  several
types of indoor units and is intended for R410A use only.

For  an  overview  which  units  are  available  you  can  consult  the
product catalogue for VRV IV-S.

An  overview  is  given  indicating  the  allowed  combinations  of  indoor
units and outdoor units. Not all combinations are allowed. They are
subject to rules (combination between outdoor-indoor, combinations
between  indoor  units,  etc.)  mentioned  in  the  technical  engineering
data.

4.5.2

Possible combinations of indoor units

In general following type of indoor units can be connected to a VRV
IV-S heat pump system. The list is non-exhaustive and is depending
on both outdoor unit model and indoor unit model combinations.

▪ VRV direct expansion (DX) indoor units (air to air applications).

▪ SA/RA (Sky Air/Residential Air) direct expansion (DX) indoor units

(air to air applications). Further referred to as RA DX indoor units.
These indoor units require a BP box.

▪ AHU  (air  to  air  applications):  EKEXV-kit+EKEQ-box  are  required,

depending on application.

▪ Aircurtain  (air  to  air  applications):  CYV/CAV  (Biddle)  series,

depending on application.

INFORMATION

▪ Combination of VRV DX and RA DX indoor units is not

allowed.

▪ Combination  of  RA  DX  and  AHU  indoor  units  is  not

allowed.

▪ Combination of RA DX and aircurtain indoor units is not

allowed.

4.5.3

Possible options for the outdoor unit

INFORMATION

Refer to the technical engineering data for the latest option
names.

Refrigerant branching kit

Description

Model name

Refnet header

KHRQ22M29H

Refnet joint

KHRQ22M20T

For  the  selection  of  the  optimal  branching  kit,  please  refer  to

"5.3.4 To select refrigerant branch kits" on page 13

.

External control adaptor (DTA104A61/62)

To  instruct  specific  operation  with  an  external  input  coming  from  a
central control the external control adaptor can be used. Instructions
(group  or  individual)  can  be  instructed  for  low  noise  operation  and
power consumption limitation operation.

The external control adapter has to be installed in the indoor unit.

PC configurator cable (EKPCCAB)

You  can  make  several  commissioning  field  settings  through  a
personal  computer  interface.  For  this  option  EKPCCAB  is  required
which  is  a  dedicated  cable  to  communicate  with  the  outdoor  unit.
The 

user 

interface 

software 

is 

available 

on 

http://

www.daikineurope.com/support-and-manuals/software-downloads/

.

5

Preparation

5.1

Overview: Preparation

This chapter describes what you have to do and know before going
on-site.

It contains information about:

▪ Preparing the installation site

▪ Preparing the refrigerant piping

▪ Preparing the electrical wiring

5.2

Preparing the installation site

Do NOT install the unit in places often used as work place. In case
of  construction  works  (e.g.  grinding  works)  where  a  lot  of  dust  is
created, the unit MUST be covered.

Choose an installation location with sufficient space for carrying the
unit in and out of the site.

5.2.1

Installation site requirements of the
outdoor unit

INFORMATION

Also read the following requirements:

▪ General  installation  site  requirements.  See  the

"General safety precautions" chapter.

▪ Service  space  requirements.  See  the  "Technical  data"

chapter.

▪ Refrigerant 

piping 

requirements 

(length, 

height

difference). See further in this "Preparation" chapter.

CAUTION

Appliance not accessible to the general public, install it in a
secured area, protected from easy access.

This  unit,  both  indoor  and  outdoor,  is  suitable  for
installation 

in 

commercial 

and 

light 

industrial

environment.

NOTICE

The  equipment  described  in  this  manual  may  cause
electronic  noise  generated  from  radio-frequency  energy.
The  equipment  complies  to  specifications  that  are
designed  to  provide  reasonable  protection  against  such
interference.  However,  there  is  no  guarantee  that
interference will not occur in a particular installation.

It  is  therefore  recommended  to  install  the  equipment  and
electric  wires  keeping  proper  distances  away  from  stereo
equipment, personal computers, etc.

b

b

a

a

c

d

f e

(mm)

≥1500

≥1500

≥1500

≥1000

≥1000

≥1000

≥1000

≥1000

≥1000

e

a

Personal computer or radio

b

Fuse

c

Earth leakage protector

d

User interface

e

Indoor unit

f

Outdoor unit

Summary of Contents for RXYSCQ6TMV1B





















































Reviews: