12
OPERATION
How to set Master Remote Controller
• When the right to select the cooling/heating operation mode is set in the master remote controller, “
” is
displayed in slave remote controllers.
The right to select the cooling/heating operation mode cannot be set in slave remote controllers.
BRC1E62
1,2
•
When the system is installed as shown below, it is necessary to designate the master remote controller.
•
Only the remote controller having the right to select the cooling/heating operation mode (master remote controller)
can select the cooling/heating operation mode.
One of these remote controllers needs to be
designated as the master remote controller.
When one outdoor unit
is connected with
several indoor units.
Outdoor unit
Indoor unit
• The displays of slave remote controllers show “
” (changeover under master control) and they
automatically follow the operation mode directed by the master remote controller. (This symbol is not displayed in
wireless remote controllers.)
However, it is possible to changeover to program dry with slave remote controller only if the system is in cooling
operation set by the master remote controller.
Setting the master remote controller
01_EN_3P344160-13U.indd 12
06-Oct-20 2:42:06 PM
Summary of Contents for RXYMQ5BVM
Page 2: ...00_CV_3P344160 13U indd 2 23 08 2020 14 09 18...
Page 21: ...18 TROUBLE SHOOTING NOTES 01_EN_3P344160 13U indd 18 06 Oct 20 2 42 07 PM...
Page 22: ...19 TROUBLE SHOOTING NOTES 01_EN_3P344160 13U indd 19 06 Oct 20 2 42 07 PM...
Page 23: ...01_EN_3P344160 13U indd 20 06 Oct 20 2 42 07 PM...