Daikin RXYMQ5BVM, Operation Manual

Page: 10 / 24

7
OPERATION OPERATION
Cooling · Heating · Fan Operation
This operation manual describes the explanation for a case in which the wired remote controller is used.
When using the wireless remote controller, refer to the attached operation manual.
• Changeover cannot be made with a remote controller whose display shows “ ” (changeover under master
control).
• When the display “ ” (changeover under master control) flashes, refer to page 12.
• For protecting the mechanism, supply the power for 6 hours at first, then operate the air conditioner.
BRC1E62
2
4,5
1. Press mode selector button several times and select the operation mode of your choice as follows.
Cooling Operation.......“ ” Heating Operation.......“ ”
Fan Operation......“ ”
2. Press ON/OFF button.
Operation lamp lights up and the system starts operation.
ADJUSTMENT
3. Press temperature setting button and program the setting temperature.
Each time this button is pressed,
the temperature setting rises or lowers 1°C.
NOTE:
• Set the temperature within the operation range shown in the table on page 6.
• The temperature cannot be set in the fan operation.
4, 5. Press airflow setting button.
To select air level or direction setting,
press “ ” buttons.
• With air level selected, use “ ” buttons.
• With direction selected, use “ ” buttons.
NOTE:
• In the heating operation, the fan stops during defrosting or at start up. It does not indicate any abnormality.
• Refer to page 10 for airflow direction adjust (only for FXCQ, FXFQ, FXHQ, FXAQ).
01_EN_3P344160-13U.indd 7 06-Oct-20 2:42:05 PM