English
10
Wiring
CAUTION
• When connecting the wires to the terminal block using a single core
wire, be sure to perform curling.
Problems with the work may cause heat and fires.
• If the stranded wires must be used, make sure to use the round
crimp-style terminal for connection to the power supply terminal
block. Place the round crimp-style terminals on the wires up to the
covered part and secure in place.
3) Pull the wire and make sure that it does not disconnect. Then fix the wire in place with a wire stop.
Wiring diagram
Wiring diagram parts table
:
Terminal strip
:
Field wiring
:
Connector
:
Relay connector
:
Connection
:
Terminal
BLK
:
Black
ORG
:
Orange
BLU
:
Blue
RED
:
Red
BRN
:
Brown
WHT
:
White
GRN
:
Green
YLW
:
Yellow
Notes
Refer to the nameplate of the unit for power requirements.
TO INDOOR UNIT
:
To indoor unit
POWER SUPPLY
:
Power supply
IN CASE OF COOLING ONLY TYPE
:
In case of cooling only type
OUTDOOR
:
Outdoor
CONDENSER
:
Condenser
DISCHARGE
:
Discharge
Good
Stripping wire at terminal block
Stranded wire
Round crimp-style
terminal
Wrong
Good
Strip wire end
to this point.
Excessive strip length
may cause electrical
shock or leakage.
Wrong
C7 .......................... Capacitor
D1,D2..................... Diode
DB1........................ Diode bridge
E1,E2,HL1,HN1,S.. Connection
FU1,FU2,FU3 ........ Fuse
IPM1 ...................... Intelligent power module
L............................. Live
M1C ....................... Compressor motor
M1F........................ Fan motor
MRM10,MRM20,
MR30,MRCW......... Magnetic relay
N ............................ Neutral
PAM ....................... Pulse amplitude modulation
PCB ....................... Printed circuit board
PS ..........................Switching power supply
Q1L ........................Overload protector
R1T,R2T,R3T .........Thermistor
S20,S40,S70,S80,
S90,X11A ...............Connector
SA1 ........................Surge absorber
V1,V2,V3................Varistor
X1M........................Terminal strip
Y1E ........................Electronic expansion valve coil
Y1S ........................Reversing solenoid valve
Z1C,Z2C,Z3C.........Noise filter (ferrite core)
ZF...........................Noise filter
........................Protective earth
........................Earth
3PEN395501-1A.book Page 10 Friday, July 24, 2015 1:53 PM
