Daikin RoCon+ HP Series, Operating Instructions Manual

Page: 51 / 516

9 Mixer module
Operating Instructions
51
Daikin RoCon+ HP
Daikin controller RoCon+ HP1
008.1447899_00 – 09/2019 – EN
9.3 Mixer module parameter settings
The parameters available for the mixer module are largely identical
to the parameter described in
Chap. 7 . Tab. 9-2 lists the additional
parameters available for the mixer module.
Parameters Setting range
Min / Max
Description Factory
setting
Incre-
ment
Access
BE HF
Min. mixer
valve pump 10 – 100% [→ Main menu → System]
Minimum power of the pump in the mixer circuit.
30% 1% N E
Max. mixer
valve pump 20 – 100% [→ Main menu → System]
Maximum power of the pump in the mixer circuit.
100% 1% N E
SlopeOffset 0 – 50 K [→ Main menu → Heating]
Setting of the slope offset of the feed target temperature on the Daikin
Altherma ETS(X/H) in comparison with the feed target temperature determ-
ined for the mixer circuit.
5 K 1 K N E
Mixer temper-
ature, current 0 – 100 °C [→ Main menu → Information → Values]
Current feed temperature in the mixer circuit
- - S S
Mixer temper-
ature, target 0 – 90 °C [→ Main menu → Information → Values]
Current target feed temperature in the mixer circuit
- - S S
Mixer pump
status On [→ Main menu → Information → Values]
Current status of the mixer pump
- - S S
Off
PWM mixer
pump 0 – 100% [→ Main menu → Information → Values]
Current modulation of the mixer pump
- - S S
Mixer valve
status Neutral [→ Main menu → Information → Values]
Current status of the mixer valve
- - S S
Close
Open
Tab. 9-2 Parameters of the mixer module