![background image](http://html1.mh-extra.com/html/daikin/rne35lv1/rne35lv1_service-manual_2459873006.webp)
Outdoor Fan / Fan Motor
Si011414E
4
Removal Procedure
2. Outdoor Fan / Fan Motor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Remove the nut and
remove the outdoor fan.
Nut size: M6
Align the
mark of the
outdoor fan with the D-cut
section of the motor shaft
when reassembling.
2
3
4
Pull out the terminal
(front-black) from the
terminal board X1M (1).
Pull out the 2 terminals
(red, white) from the
capacitor (C1R).
Cut the clamp and
release the fan motor
lead wire from the
groove.
When reassembling, put the
fan motor lead wire through
the back of the fan motor so
as not to be entangled with
the outdoor fan.
Terminal board
Capacitor
D-cut
Shaft
Outdoor fan
Nut
(R21348)
10 mm
(0.39 inch)
(R18954)
Clamp
Fan motor lead wire
Groove
Capacitor
Terminal board
(R21349)
(R3249)
Lead wire
Outdoor fan
X1M
to fan
motor: black
(R21561)
C1R
to fan motor: white
to fan
motor: red
(R21562)