Si001408EA
PCB
Removal Procedure
11
4. PCB
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Remove the screw and
release the earth /
ground wire.
2
Pull out the 3 clamps.
3
4
Cut the clamp.
Pull out the terminals
from the terminal board.
Before pulling out the
terminals, confirm the
terminal locations.
(1): black (back)
(2): white (back)
(3): red (front)
: yellow / green (back)
Earth / ground screw
(R20330)
(R20331)
Clamp
Clamp
(R20332)