Si00-979
Removal of Outdoor Fan / Fan Motor
Removal Procedure
3
3
Remove the screw and
remove the stop valve
cover.
3. Removal of the propeller
fan
When assembling, align the
mark of the outdoor fan
and the D cut section of the
motor shaft.
1
Remove the fan fixing
nut and remove the
propeller fan.
When assembling the fan
motor, let the
z
mark go
upper. (The direction of the
lead wire outlet.)
Remove the fan fixing nut
with the 13 mm wrench.
4. Removal of the fan motor
1
Disconnect the fan
motor connector [S70]
from PCB.
Step
Procedure
Points
(R10199)
D cut
(R5833)
mark
(R5834)
mark
mark
Fan fixing nut
13 mm
(R5835)
(R10200)
[S70]