ENGLISH
1
3
Original Instruction
1-OM-SLM9-0911(1)DAIKIN-EN.indd 1
1-OM-SLM9-0911(1)DAIKIN-EN.indd 1
5/6/14 9:57:08 AM
5/6/14 9:57:08 AM
NetPro Dual interfaces the air conditioner unit to BMS system via dry contact outputs
and MODBUS mode allowing monitoring and controlling of operating parameters.
*Please refer to the documents MODBUS Protocol V1.3 for the full MODBUS
address details of controlling and operating parameters.
NetPro Dual
Modbus Mode is designed to integrate the air-conditioner system with the network
system through RS485 communication.
Modbus Control can be performed by setting the desired operating mode [On-Off/
mode/temperature/ fan speed/ temperature display unit (°C/ °F)] at the particular unit’s
display control panel. The setting will only affect the particular unit under control.
The Summary of the monitoring and controlling of operating parameters is shown as
below:
Modbus Control
* A
d
dress 32
500
(compressor status) is only application for model:
CKE
,
SQMB,
BM
3S, BMS/BML
.
*
