16
Operation
English
Using Air Purifying Operation
1.
Press
.
• Press again to turn OFF.
• If AUTO operation was in progress last time, AUTO operation will be performed automatically. If you want to perform only air
purifying operation, press
or
.
• If humidifying operation was running previously, humidifying operation will start automatically. If you want to perform only air
purifying operation, press
until the HUM lamp turns off.
Attention
When not performing humidifying operation, discard the water in the water tank and humidifying tray.
Changing the Airfl ow Rate
1.
Press
during operation to change the airfl ow rate.
• Each press cycles between the FAN lamps [green]
: Standard
: Turbo
: Quiet
: Low
Quiet
A gentle breeze is emitted. Recommended for use during sleep hours.
As the deodorising capacity is reduced, it is recommended that the FAN setting be set to Standard or
above if odour needs to be quickly eliminated from a room.
Turbo
The ambient air is quickly purifi ed using a large airfl ow. Recommended for use while you are cleaning up a
room.
Note
• At the time of purchase, the unit is set to carry out air purifying operation in AUTO FAN MODE.
• If the power supply plug is unplugged, or the unit is stopped and started again, the operation that was in progress last time will
start again. (If the unit is stopped during GOOD SLEEP MODE and started again, the operation that was in progress before
GOOD SLEEP MODE was selected will start again.)
• Operation settings cannot be performed for about 2 seconds immediately after the power supply plug is inserted.
Attention
Do not move the unit, or attach or remove parts to/from the unit while
it is in operation. Water leakage, breakage or malfunction may result.
