background image

4

English

 

 

WARNING  

Observe in order to prevent fire, electric shock or severe injury.

 

„

During use

• Do not use chlorinated or acidic detergents.

 (Injury may result from degradation or 

cracking of plastic, or harm may be caused to health from the production of toxic gases)

• 

Keep burning cigarettes or incense sticks away from the unit.

 

(Fire or smoke may result from ignition or suction toward the unit)

• 

Do not attempt to disassemble, reconstruct or repair the unit 

yourself. 

(Fire, an electric shock or injury may result) For repairs, please contact 

the place of purchase.

• 

Do not insert fingers, sticks, or any other item, into the air inlets 

or air outlet.

 

(An electric shock, injury or damage may result)

• Do not pour water onto the air outlet or the unit.

 (Fire or an electric shock may result)

• 

Do not use flammable substances (hair spray, insecticide, etc.) near the unit.

 

Do not wipe the unit with benzine or thinner.

 (An electric shock, fire or cracking may 

result)

 

„

Immediately turn off and unplug the unit if there are any signs of abnormality or damage

Examples of abnormality and malfunction

• 

The unit does not operate even if the switch is turned on.

• 

Current passes through the cord only sometimes if the cord is moved.

• 

There are abnormal sounds or vibrations during operation.

• 

The casing of the unit has deformed or is abnormally hot.

• 

There is a burnt smell. (Malfunction, an electric shock, smoke, fire, etc., may result if the 

abnormality is not addressed and the unit continues to be used) Contact the place of 

purchase.

 

„

Concerning unit body

• 

Do not block air inlet and air outlet with laundry, cloth, curtain etc..

(Air circulation get worse which may cause overheat or fire.

• Do not spray with deodorants etc or use it near unit

(This may damage the unit)

Do not sit or lean on the top of the unit body

(This may result from falling or toppling.)

Read First

Summary of Contents for MC80ZBFVM













































Reviews: