background image

28

English

 WARNING

•  Do not use gasoline, benzine, thinner, polishing compound, paraffin, alcohol, etc. (Cracking, electric shock, and ignition of fire 

may result)

•  Do not wash the unit with water. (Electric shock and fire or malfunctioning may result)

Maintenance

Filter Fixing Unit 

 

Page 14

When dirt becomes an issue

Vacuum clean

 

  

•  Remove, then vacuum away dust using a vacuum cleaner. 

Deodorising Filter   

For method to attach/remove, refer 

 

Page 14

   

 When dirt becomes an issue

Vacuum clean

 

 

 When odour becomes an issue 

Leave in a breezy, shaded area

Cannot be washed with water

  

•  Remove the deodorising filter from the unit, then 

vacuum away dust using a vacuum cleaner.

•  If odour becomes an issue, leave the part in a 

shaded area exposed to the breeze.  
(approx. 1 day)

•  Do not rub the surface.
•  Do not wash with water. 

(If you wash it with water, the filter will lose its 
shape and can no longer be used)

Sometimes, the surface looks white but there is 
no issue for deodorising performance and 
operation. Wear gloves to prevent dust from the 
deodorising filter making your hands dirty.

Dust Collection Filter    

For method to attach / remove, refer to 

 

Page 29

   

When dirt becomes an issue

Vacuum clean

 

        Cannot be washed with water

  

Tag

If you lay down newspaper 

etc., the surroundings will not 

get dirty

•  Lightly vacuum the dust on the surface that doesn't have the tag. 

Be careful as the filter is easily damaged

In case filter is damaged or holes are opened on the surface, dust 

collecting performance decreases because dust passes though filter.

About every 10 years 

Replace

 

    

 

Page 29

   

Attention

• 

Make sure that the dust collection filter, deodorising filter and filter fixing unit are attached to the unit when the unit is operating. 

If these parts are not attached when the unit is operated, breakage/malfunctioning may result.

• 

Follow the advice below to prevent discolouration or deformation.

• 

If detergent was used, be sure to wipe it up thoroughly so none remains.

• 

If hot water is used, make sure that it is 40°C or less.

• 

Do not leave parts to dry in direct sunlight.

• 

Do not dry parts using a hairdryer.

• 

Do not expose to fire. 

• 

When using a vacuum cleaner, make sure to not apply force to or knock the part. (Damage may result)

• 

Do not spray deodorants etc on unit and do not use sprays near the unit. (May cause malfunction)

• 

This air purifier is a product that collects dust and odour substances of the entire room. If the unit is used in an environment with strong odours 

such as cigarette smoke, cosmetics or pharmaceuticals, odours will attach on the filter and for a few months or few weeks, odours may be 

re-emitted. It is recommended to use the unit together with room ventilation for environments with strong odours. 

(odour takes a longer time to be eliminated compared to dust)

Summary of Contents for MC80ZBFVM













































Reviews: