background image

  English / 

2

Safety Precautions

Keep this manual where the operator can easily find them.

Read this manual attentively before starting up the unit.

For the reason of safety the operator must read the following 
cautions carefully.

This manual classifies precautions into WARNING and CAUTION. 
Be sure to follow all precautions below: they are all important for 
ensuring safety.

If you do not follow these instructions exactly, the unit may cause 
property damage, personal injury or loss of life.

If you do not follow these instructions exactly, the unit may cause minor 
or moderate property damage or personal injury.

WARNING

• Do not use the power cable if it is damaged.

Using a damaged power cable is extremely hazardous; if the 
power cord becomes damaged, you must obtain a replacement 
from the manufacturer or from a properly-authorized service agent. 
Do not attempt replacement yourself.

Do not disassemble, remodel or attempt to service this 
equipment.

Unwarranted tampering can lead to fire and/or malfunction.

Do not operate with wet hands.

Electric shock may occur.

Do not use power supplies other than the rated supplies.

Fire or electric shock may occur.

Do not damage the electrical power cord, construct 
anything, or forcibly bend, stretch or twist the cord.
Do not set heavy items on the cord or place the cord 
between items.

If the electrical power cord is damaged, fire or electric shock may occur.

Before changing filters, cleaning the equipment or moving it, 
turn it OFF and unplug the power cable.

Working with power ON can lead to fire and/or electric shock.

Do not use the power cable if damaged or loose in the socket.

Using the power cable in anything but proper working 
condition can lead to short-circuits and subsequently electric 
shock and/or fire.

Do not use in humid places or places which might be 
wet, such as bathrooms.

Contact with water can lead to electric shock or damage the 
equipment.

Do not use where oil components, such as machine oil, 
are floating around.

There is the danger of cracking, electric shock or combustion.

Do not wet the air outlet or the main unit. 

It may cause fire or electric shock.

CAUTION

Do not use close to lighting equipment (within 1m).

The reception sensitivity of the remote controller may be 
reduced and the color may change.

Do not use outdoors or where exposed to direct sunlight.

Direct sunlight can weaken remote controller signal reception 
sensitivity and discolor the casing.

Do not use near to sources of heat such as heaters.

Heat can discolor and deform the casing.

Keep the unit and remote control minimum 2m from 
lighting, TVs, radios, stereos and aerials.

This unit can disturb TV pictures and generate interference.
Illumination can weaken remote controller signal reception 
sensitivity and discolor the casing.

Do not use in the place of kitchen fans or cooker hood fans.

Adverse conditions of use can shorten service-life of the 
prelilter and ion filter, as well as lead to equipment damage.

Prevent combustibles (hair sprays, etc.), sparks and incense 
from being drawn into the unit.

Such substances can cause fire.

Do not insert fingers or foreign objects into the inlet or 
outlet openings.

Electric shock or damage may occur.
There exists a danger of hands getting caught in the motor and 
causing injury.

The appliance is not intended for use by young children 
or infirm persons without supervision.

Young children should be supervised to ensure that they 
do not play with the appliance.

When using pesticides of an indoor fumigation type 
(fume release), stop the operation of the air purifier to 
none of the chemical is sucked inside the unit.

The chemical components will accumulate inside the unit and 
depending on your physical condition, you may react to the irritation 
which is bad for your health.

When used in conjunction with a humidifier, keep mist 
from being directly drawn into the unit.

Mists can lead to electric shock and/or equipment damage.

Do not block the intake or outlet.

Blocked openings can reduce capacity (air will not be cleaned 
throughout the entire room) and/or damage the equipment.

Do not place any containers which hold water such as 
goldfish bowls or flower vases on or close to the unit.

If water gets inside the unit, electric shock or malfunction may 
occur.

Do not wipe with benzine or thinner, or spray with 
insecticide.

Such substances can cause cracking, electric shock and/or fire.

If not using the unit for long periods of time, unplug the power cable.

Dielectric breakdown can lead to leakage current and subsequently 
electrical shock and or short-circuit may occur causing a fire.

If the power plug is unplugged, be sure to hold and pull out 
the end of the power plug without holding the power cord.

There is a chance that an electrical short or short-circuit may 
occur causing a fire.

Do not operate with a pre-filter or filter removed.

Malfunction may occur.

Do not sit on, stand on or shake the unit.

Malfunction may occur.

Do not use when the unit is on its side or leaning.

Malfunction may occur.

When using another burner at the same time, actively 
ventilate the area. 
This unit cannot remove carbon monoxide. 

If the ventilation is not sufficient, carbon monoxide poisoning 
may occur.

Do not use in locations where there is a large amount of 
soot, such as a kitchen or locations where there 
combustible gas, corrosive gas or metallic dust is 
present.

Fire or malfunction may occur.

WARNING

CAUTION

Never do.

Be sure to follow the 
instructions.

Never touch the air purifier 
(including the remote 
controller) with a wet hand.

Never cause the air purifier 
(including the remote 
controller) to get wet.

Toxic substances such as cigarettes (carbon monoxide) cannot be 
removed.

01_EN_3P167171-1A.fm  Page 2  Tuesday, October 18, 2005  4:14 PM

Summary of Contents for MC707VM-S




















Reviews: