6
Read First
Operating/Indicator panel
Preparation Before Operation
Accessories
Operation manual ... 1
Deodorising filter ................
1
Attach to the unit before operation.
1
Positioning the unit
Before installation, peel off
the tape fixing the power
supply cord to the bottom
of the unit and draw out the
power supply cord.
Power supply cord
Tape (blue)
Pointers for good positioning
•
Choose a position from where airflow can reach all areas
of the room.
• Place on a stable surface. If the unit is placed on an
unstable surface, vibrations from the unit may be amplified.
•
If you find that interference from the power circuit inside
the unit or cables caused interference on your TV screen
or static noise to be emitted from nearby radios or stereos,
move the unit to at least 2 m away from the device.
Keep cordless phones and radio-controlled clocks away
from the unit also.
Attention
•
To avoid staining of walls, position the unit in accordance
with the positioning measurements in the illustration.
However, note that since this unit draws in dirty air, certain
types of wall may become stained even if the
measurements are adhered to.
In such cases, be sure to maintain sufficient distance
between the unit and the wall.
• When used for a long period of time in the same location,
the floor and surrounding walls may get stained as air is
drawn into air inlets near the base of the unit. It is
recommended to clean the unit periodically.
At least 100 cm
away from ceiling
At least 30 cm
away from wall
Air flow
At least 10 cm
away from wall
At least 30 cm
away from wall
ON-OFF button
Press to turn the power ON or OFF
FAN button
Press to cycle between FAN settings
MODE button
Press to active SLEEP MODE
Summary of Contents for MC30YVM
Page 23: ......
