Daikin MC30YVM, Operation Manual

Page: 21 / 24

20
„
Air purifying function
Phenomenon Check points
Air purifying capacity is
reduced
• Is the unit positioned in a place where airflow cannot
reach or surrounded by obstacles?
¼
Choose a position that is obstacle-free and from where
airflow can reach all areas of the room.
• Is the pre-filters or dust collection filter dirty?
¼
Clean these parts.
► Page 13, 14
The air outlet is emitting an
odour
• Is the deodorising filter dirty?
¼
Clean these parts.
► Page 14
• In some cases the air outlet may emit a slight odour as trace
amounts of ozone are generated. However, the amount is
negligible and is not harmful to your health.
• Is the room filled with odours due to cooking or several
people smoking together etc?
¼
The odour will gradually fade as the unit operates.
• Have you moved the unit from another room?
¼
The unit may emit the odour of the room in which it was
used previously. Let the unit run a while longer.
• Is there anything in the room that is giving off an odour
continuously?
(Paint, new furniture, wallpaper, sprays, cosmetics, chemicals)
¼
As continuously emitted odours cannot be completely
eliminated, you should ventilate the room at the same time
or run the unit in a well-ventilated room for a short while.
No air is being emitted • Is the air outlet or an air inlet blocked?
If they are not blocked, the fan motor is faulty.
¼
Contact the place of purchase.
„
Other
Phenomenon Check points
The fan stops midway through
unit operation
• Are the pre-filters and dust collection filter attached before
the unit is operated?
The fan is configured to stop in order to protect electrical
components if a part is not properly attached.
¼
If a part is not attached, unplug the unit and attach all parts
before turning the unit on again.
The sound of Streamer discharge
can no longer be heard
• Streamer operation is dependent on time control.
► Page 12
There is interference on our TV
screen
• Is the TV or radio positioned within 2 m of the unit, or is
an indoor antenna positioned near the unit?
• Are the power supply cord or antenna cable of the TV or
radio routed near the unit?
¼
Keep the unit as far as possible from the TV, radio, or antenna.
Just inserting the power plug
causes operation to start
• Did you disconnect the power plug during a power failure,
or when a sudden voltage fluctuation occurred, to move the
unit or disconnect the power plug during the last operation?
¼
The auto-restart function automatically resumes operation.
Troubleshooting