Daikin MC30YVM, Operation Manual

Page: 15 / 24

14
WARNING
• Do not use petrol, benzine, thinner, polishing compound, paraffin, alcohol, etc. (An electric
shock, fire, or cracking may result)
• Do not wash the main body of the unit with water. (An electric shock, fire, or malfunctioning/
breakage may result)
Maintenance
Deodorising filter unit
When concerned about odours or dirt
Vacuum clean
Do not use water
• Remove from the unit together with the frame
and remove dust using a vacuum cleaner.
• If odour becomes an issue, leave the part in
a shaded, breezy area. (about 1 day)
• Do not scrub the surface.
• Do not use water when cleaning. (If water is
used, the part will lose its shape and become
unusable.)
► Page 17
Removing
Hold the lever and grip of the deodorising filter
unit and remove.
Lever
Attaching
Fully insert the deodorising filter unit.
Push until you
hear a catching
sound.
• If the deodorising filter unit is removed or incorrectly
installed, the MODE lamp will blink.
Dust collection filter
Tag
When concerned about dirt
Vacuum clean
Do not use water
• Remove dust on the filter from the face without tag
using a vacuum cleaner.
(Please be careful because the filter is easily damage.)
• If the filter is damaged or pores are enlarged, dust will
pass through the filter and this caused the capacity for
dust collection to be reduced.
About every 10 years Replace
About part replacement timing
• Replacement timing depends on usage patterns and the
location of the unit.
If the unit is used daily in a home where 5 cigarettes are
smoked a day, the filter should be replaced about every
10 years. (Calculation based on testing method of
Japan Electrical Manufacturers Association JEM1467
standard.)
If the impurity content of the ambient air is high, the filter
will need more frequent replacement.
If the filter is failing to perform, it is time to replace it.
About purchasing and disposal
• Refer to “Separately Sold Part”.
► Page 15
Removing
1 Remove the deodorising filter unit.
2 Pull the tag
upward.
3 Hold the lower part of the dust
collection filter and lift it out.
Attaching
1 Install the new dust collection filter, being
careful of the orientation.
Side with tag and
markings should face
outward and arrow
should point up
2 Attach the deodorising filter unit.
Do not detach
the deodorising
filter from frame
Attention
• Make sure that the dust collection filter and deodorising filter unit are attached to the unit when the unit is operating.
If these parts are not attached when the unit is operated, breakage/malfunctioning may result.
• Follow the advice below to prevent discolouration or deformation.
– If detergent was used, make sure to wipe it up thoroughly so none remains.
– If hot water is used, make sure that it is 40°C or less.
– Do not leave parts to dry in direct sunlight.
– Do not dry parts using a dryer.
– Do not apply fire to parts.
• If using a vacuum cleaner, make sure to not apply force to or knock the part. (Damage may result)
Grip
Dust collection filter