15
|
Unit installation
Installer and user reference guide
50
LRYELRNUN5A7Y1
CO₂ Conveni-Pack outdoor unit
4P605460-1 – 2020.08
15 Unit installation
In this chapter
15.1 Preparing the installation site
Do NOT install the unit in places often used as work place. In case of construction
works (e.g. grinding works) where a lot of dust is created, the unit MUST be
covered.
Choose an installation location with sufficient space for carrying the unit in and out
of the site.
15.1.1 Installation site requirements of the outdoor unit
INFORMATION
Also read the following requirements:
▪
General installation site requirements. See
"2 General safety precautions"
▪
Service space requirements. See
▪
Refrigerant
piping
requirements
(length,
height
difference).
See
"16.1.1 Refrigerant piping requirements"
▪
Provide sufficient space around the unit for servicing and air circulation. See
"26.1 Service space: Outdoor unit"
129].
▪
Make sure the installation site withstands the weight and vibration of the unit.
▪
Make sure the area is well ventilated. Do NOT block any ventilation openings.
▪
Make sure the unit is level.
▪
Select a place where rain can be avoided as much as possible.
▪
Select the location of the unit in such a way that the sound generated by the unit
does not disturb anyone, and the location is selected according the applicable
legislation.
▪
Heat exchanger fins are sharp and injury is possible. Choose an installation
location where there is no risk for injury (especially in areas where children play).
Do NOT install the unit in the following places:
